Product is shown in the pictures below. Specifications for this product are found in the Delweld Product Catalog which is available for download below.
All components are fabricated using 54,000-PSI minimum yield strength HRP&O steel tubing. Bedposts are 1 ½ inch square steel tubing with 15ga. (0.072”) wall thickness. Stretchers are of 1 ½ inch by 1 inch rectangular steel tubing with 16ga. (0.065”) wall thickness. Two specially designed laser cut pin plates of 11 ga. thickness allow for insertion of 12 pins each creating a total of 11 height adjustments from bottom to top, in 3 inch increments. They are then robotically MIG welded to each bedpost. The pin plates are specially designed to allow the bedposts and stretchers to be positively aligned together before finish welding. After each component is processed to exacting tolerances, which includes cutting and perforating, they are accurately fixtured and are finish welded using state of the art robotics to insure total unitized integrity every time. Specially designed high impact plastic inserts are installed in the bedposts to act as both floor glides and allow for stacking, to create bunk beds or lofts* without the need of additional stacking parts or tools
*STLP-3480 / 77 Loft package, which can be purchased separately, consists of 2 ST-3412 adjustable headboards and 2 SR-80NE / 77NE stabilizer rails.
Model SR-80NE / 77NE Stabilizer Rail
All components are fabricated using special grade 70,000-PSI minimum yield strength HRP&O steel tubing. Rails are 2 inch by 1 inch rectangular steel tubing with 14ga. (0.083”) wall thickness. Two specially designed laser cut hook plates are accurately fixtured and robotically MIG welded to each end of the rail. This insures repeatability and quality every time.
All components are cleaned, pickled, phosphated, and non-chromic sealed in six stages. They are then dried and electrostatically powder coated with hybrid dry powder and baked at 400 degrees. Color is Textured Black.
||Delweld Product Catalog
||< 1 mb