Product is shown in the pictures below. Specifications for this product are found in the Delweld Product Catalog which is available for download below.
All components are fabricated using 54,000-PSI minimum yield strength A-1010 HRP&O steel tubing. Guardrail main frame is bent in one piece and is 1 inch square steel tubing with 16ga. (0.065”) wall thickness. Horizontal stretchers (2 each) are 1 inch by ½ inch rectangular steel tubing with 16ga. (0.065”) wall thickness. The 2 stretchers, and 2 specially designed, laser cut 16ga. attachment plates are robotically MIG welded to each side of the main frame. The self locking attachment plates permit engagement of 3 pins on the Steel*Tec headboards, at each end. This full-length coverage and ease of installation (no additional hardware necessary) help make the Steel*Tec System the most durable, flexible, and safe sleep system on the market. High impact plastic inserts are installed in the main frame to act as closure to the ends of the tube, leaving no sharp ends. All construction and materials meet or exceed Federal guidelines for guardrails.
*Other lengths available
All components are cleaned, pickled, Iron phosphated, and non-chromic sealed in six stages. They are then dried and electrostatically powder coated with hybrid dry powder and baked at 400 degrees. Color is Textured Black. The Powder Coating Process applies dry powder pigments to the parts by means of electrostatic charge. There are no solvents or thinners used as an application vehicle, thus there are zero VOC’s emitted in this process.
PLEASE NOTE: Use of a full length and or a partial length guardrail on the top bunk has been mandated by the federal government in certain applications.
||Delweld Product Catalog
||< 1 mb