Product is shown in the picture to the left. Specifications for this product are found in the Delweld Product Catalog which is available for download below.
Spring Frame Construction
All components are fabricated from 54,000-PSI minimum yield strength HRP&O steel tubing. End sections are of 1 ½ inch square steel tubing with 15ga. (0.072”) wall thickness. Side sections are of 2 inch by 1 inch rectangular steel tubing with 15ga. (0.072”) wall thickness. Lateral cross braces (2) are of 1 inch square tubing with 15ga. (0.072”) wall thickness. The side sections are specially notched on the inside to allow end insertion, which positively aligns and locks the end and side sections together before finish welding. Precisely sized and located slots are laser cut strategically into the side sections to facilitate an accurate, rigid, but tool free connection to the LT Series Flat Bed tubular legs (see below). After each component is processed to exacting tolerances, by means of high tech laser cutting, they are accurately fixtured and are finish welded using state of the art robotics to insure total unitized frame integrity every time. This unique all tubular design greatly enhances overall strength and safety creating a new unmatched level of excellence.
*Other lengths and widths available
The spring surface is made up of 16 rows of 9 ga. genuine No Sag sinuous spring wire with “Z” hooks on each end. There are 6 rows of 12ga. connecting links between each row of sinuous springs for a total of 90 links. There are five 12ga. helical springs, with 16 turns and a ¾ inch diameter, on each end of the spring frame. All spring components are inserted inside the tubular frame leaving it both tamper-proof and free of sharp edges.
Legs are fabricated using two 2” x 16 ga. wall thickness square tubular posts, and one 11/2” x 1” x 16 ga. wall thickness rectangular tubular cross stretchers. Each of the two laser processed, and robotically welded leg assemblies install and positively lock the corners of the bedspring without tools or hardware. High impact plastic floor glides are inserted in each post.
All components are cleaned, pickled, phosphated, and non-chromic sealed in six stages. They are then dried and electrostatically powder coated with hybrid dry powder and baked at 400 degrees. Color is Textured Black.
Download Product Catalog
To view the Delweld Product Catalog please ensure that the Adobe Acrobat Reader has been installed on your machine and then click the download the "Download" link below.
||Delweld Product Catalog
||< 1 mb